Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE(for Rear Door) › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075201 BLACK OUT TAPE(for Rear Door) A

EXTERIOR PANELS / TRIM  BLACK OUT TAPE(for Rear Door)  INSTALLATION  


PROCEDURE

Hide 75978H 2.INSTALL REAR DOOR LOWER OUTSIDE STRIPE

a.

Refer to the illustration to position a new rear door lower outside stripe.

B280085C07
5.083,0.604 4.833,0.802 false 5.24,1.719 5.021,1.583 false 5.969,2.635 5.896,2.5 5.896,2.5 5.667,2.5 false 4.708,2.604 4.833,2.5 4.833,2.5 5,2.5 false 2.604,2.74 2.823,3.031 0.219,0.292 10 a 3.188,2.656 3.406,2.948 0.219,0.292 10 a 4.771,0.063 5.031,0.292 0.26,0.229 10 A 4.958,2.063 5.229,2.302 0.271,0.24 10 B 4.125,0.031 4.427,0.292 0.302,0.26 10 a-a 5.115,0.438 5.333,0.656 0.219,0.219 10 *a 5.281,1.667 5.552,1.938 0.271,0.271 10 *a 5.521,2.396 5.813,2.604 0.292,0.208 10 *c 5.021,2.406 5.344,2.635 0.323,0.229 10 *b 5.615,2.146 6.021,2.448 0.406,0.302 12 *B 4.333,2.177 4.688,2.448 0.354,0.271 12 *A
*A LH Side *B RH Side
*a Edge of Curved Surface *b Straight
*c Triangle - -


Standard Measurement
Dimension Measurement
A 1.5 mm (0.0591 in.)
B 1.0 mm (0.0394 in.)


b.

Remove the release paper and apply the stripe.


Hide 75988C 3.INSTALL REAR DOOR OUTSIDE STRIPE

a.

Refer to the illustration to position a new rear door outside stripe.

B280086C07
5.031,1.448 4.75,1.615 false 6.042,1.333 5.854,1.438 false 3.938,2.865 4.292,2.865 false 6.74,2.844 6.958,2.844 false 1.573,1.552 1.844,1.844 0.271,0.292 10 a 1.594,2.177 1.885,2.49 0.292,0.313 10 a 4.073,0.135 4.49,0.427 0.417,0.292 10 a-a 4.208,1.135 4.51,1.354 0.302,0.219 10 A 6.5,1.583 6.771,1.823 0.271,0.24 10 B 4.594,1.563 4.938,1.865 0.344,0.302 10 *a 6.063,1.24 6.365,1.448 0.302,0.208 10 *a 6.208,2.24 6.521,2.458 0.313,0.219 12 *B 4.656,2.229 4.979,2.469 0.323,0.24 12 *A 3.792,2.771 4.042,3 0.25,0.229 10 *b 6.969,2.75 7.156,3 0.188,0.25 10 *c
*A LH Side *B RH Side
*a Edge of Curved Surface *b Straight
*c Triangle - -


Standard Measurement
Dimension Measurement
A 1.5 mm (0.0591 in.)
B 1.0 mm (0.0394 in.)


b.

Remove the release paper and apply the stripe.


Hide 67674A 4.INSTALL REAR DOOR FRAME GARNISH

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68104 5.INSTALL REAR DOOR GLASS SUB-ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68124B 6.INSTALL REAR DOOR QUARTER WINDOW GLASS

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67408F 7.INSTALL REAR DOOR LOWER WINDOW FRAME SUB-ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68152C 8.INSTALL REAR DOOR GLASS RUN

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67872 9.INSTALL REAR DOOR WEATHERSTRIP

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68640A 10.INSTALL REAR DOOR CHECK ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67842E 11.INSTALL REAR DOOR SERVICE HOLE COVER

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68174A 12.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67604 13.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 74260 14.INSTALL REAR ARMREST ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 15.INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 69284D 16.INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 17.CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 64718C 18.INSTALL LUGGAGE TRIM SERVICE HOLE COVER