Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.02–2015.04
RM2040EQ _56 Audio / Visual / Telematics _014717 NAVIGATION / MULTI INFO DISPLAY _0078805 NAVIGATION SYSTEM(for HDD) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  B15F5  A/C ECU Vehicle Information Reading/Writing Processor Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the Air conditioning amplifier assembly cannot be customized via the navigation system vehicle customization screen.

HINT:

The Air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the multi-display screen.


DTC No. Detection Item DTC Detection Condition Trouble Area
B15F5 A/C ECU Vehicle Information Reading/Writing Processor Malfunction Air conditioning amplifier assembly vehicle setting processing error.
·

CAN communication system

·

Air conditioning system

·

Air conditioning amplifier assembly

·

Navigation ECU sub-assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the intelligent tester to check if the CAN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

OK:

CAN communication DTCs are not output.



Result:
Proceed to
OK
NG



OK

2.CHECK AIR CONDITIONING SYSTEM

NG

2.CHECK AIR CONDITIONING SYSTEM
a.

Check if the air conditioning system is malfunctioning.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the air conditioning system.


OK:

No malfunctions are present in the air conditioning system.



Result:
Proceed to
OK
NG



OK

3.CHECK CUSTOMIZE ITEMS

NG

3.CHECK CUSTOMIZE ITEMS
a.

Display the "Climate settings" screen.


b.

Make a note of the customizable items for the air conditioning system.

HINT:

These air conditioning system items shown as customizable via the multi-display vehicle customization screen can also be changed using the intelligent tester. In the following steps, the intelligent tester will be used.


i.

To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the air conditioning system related items that can be customized via the multi-display screen.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>CUSTOMIZE PARAMETERS



c.

Using the intelligent tester, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the multi-display screen.

OK:

The items available for customization via the multi-display screen can be customized successfully using the intelligent tester.



Result:
Proceed to
OK
NG



OK

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY