Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › from 2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075202 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 52536 1.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B402809

Engage the claw.


b.

Install the front bumper side retainer LH with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 52535 2.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52021 3.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B402808

Install the front bumper reinforcement sub-assembly with the 6 bolts.

Torque:
61 N*m (622 kgf*cm, 45 ft.*lbf)


b.

Engage the 5 clamps.


Hide 52611 4.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B402807

Engage the 2 guides to install the front bumper energy absorber.


Hide 53111 5.INSTALL RADIATOR GRILLE

a.
B400878

Engage the 4 claws.


b.
B400877

Install the radiator grille to the inner radiator grille with the 9 screws.


Hide 75310A 6.INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY

a.
B381028

Engage the 2 guides and 4 claws.


b.
B381027

Install the radiator grille emblem assembly with the 2 screws.


Hide 7.INSTALL RADIATOR GRILLE SUB-ASSEMBLY

a.
B400876

Engage the 6 claws.


b.
B400875

Install the radiator grille sub-assembly with the 4 screws.


Hide 53112E 8.INSTALL NO. 1 LOWER RADIATOR GRILLE

a.

Engage the 18 claws.

B400874


b.
B400873

Install the No. 1 lower radiator grille with the 6 screws.


Hide 52129B 9.INSTALL LOWER FRONT BUMPER COVER (for Standard)

a.
B400871C01
1.635,2.625 1.604,2.25 true 1.563,2.635 1.792,2.865 0.229,0.229 10 true *a
*a Hook


Engage the hook.


b.

Engage the 3 guides and 2 claws to install the lower front bumper cover.


Hide 52129B 10.INSTALL LOWER FRONT BUMPER COVER (for Sport Package)

a.
B400872C01
1.698,2.615 1.698,2.229 true 1.604,2.625 1.823,2.823 0.219,0.198 10 true *a
*a Hook


Engage the hook.


b.

Engage the 2 claws to install the lower front bumper cover.


Hide 53879H 11.INSTALL FRONT FENDER LINER RETAINER

a.
B381757

Engage the claw to install the front fender liner retainer.

HINT:

Use the same procedure for the RH side and LH side.



Hide 81520 12.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH

Hide 81510 13.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 89348 14.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89341A 15.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)