Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY
81520
2.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY
Remove the 2 screws and front turn signal light assembly.
81510B
3.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.
Remove the front turn signal light bulb from the front turn signal light socket.
81510H
4.REMOVE FRONT CLEARANCE LIGHT BULB
Turn the front clearance light socket with the front clearance light bulb as shown in the illustration to disconnect them as a unit.
Remove the front clearance light bulb from the front clearance light socket.