Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.INSTALL REAR COMBINATION LIGHT ASSEMBLY
Engage the guide to temporarily install the rear combination light assembly as shown in the illustration.
Install the rear combination light assembly with the 3 nuts.
Engage the clamp.
Connect the 2 connectors.
64722
2.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER
64725D
3.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64717A
4.INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER
58387
5.INSTALL REAR FLOOR FINISH PLATE
64711
6.INSTALL LUGGAGE COMPARTMENT FLOOR MAT
7.INSTALL REAR BUMPER ASSEMBLY