Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET › from 2016.05
RM2040EQ _58 Vehicle Interior _014729 SEAT BELT _0258635 CHILD RESTRAINT SEAT ANCHOR BRACKET A

SEAT BELT  CHILD RESTRAINT SEAT ANCHOR BRACKET  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH (for RH Side)

a.

Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Engage the clamp.


c.

Connect the connector.


Hide 2.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH (for LH Side)

HINT:

Use the same procedure as for the RH side.


Hide 3.INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

Hide 4.INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

Hide 64277C 5.INSTALL NO. 2 ROOM PARTITION COVER (for LH Side)

Hide 72693 6.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 7.INSTALL REAR SEAT CUSHION ASSEMBLY