The power management control ECU transmits and receives signals via CAN communication to and from the ECM, skid control ECU assembly, main body ECU, airbag sensor assembly, and air conditioning amplifier assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| U0100-530 | Lost Communication with ECM / PCM "A" | Problem with CAN communication between the ECM and power management control ECU (CAN communication system malfunction) | CAN communication system | Comes on | Master Warning Light:
Comes on |
| U0129-527 | Lost Communication with Brake System Control Module | Problem with CAN communication (V BUS) between the skid control ECU assembly and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Comes on |
| U0129-528 | Lost Communication with Brake System Control Module | Problem with CAN communication between the skid control ECU assembly and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Comes on |
| U0140-146 | Communication Error from Body ECU to HV ECU | Problem with CAN communication between the main body ECU and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Comes on |
| U0151-763 | Communication Error from Airbag ECU to HV ECU | Problem with CAN communication between airbag sensor assembly and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Comes on |
| U0164-827 | Communication Error from A/C ECU to HV ECU | Problem with CAN communication between air conditioning amplifier assembly and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Does not come on |
| U1107-436 | Lost Communication with Power Management Module | Problem with CAN communication between the power source ECU and power management control ECU (CAN communication system malfunction) | CAN communication system | Does not come on | Master Warning Light:
Comes on |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: System Select / Utility / All Codes.
Check if DTCs are output.
| Result | Proceed to |
|---|---|
| Power management control ECU outputs P2532-772 | A |
| Power management control ECU does not output P2532-772 | B |
Turn the power switch off.
A
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING