REAR VIEW MONITOR SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the rear view monitor system seems to be malfunctioning, use the GTS to check for malfunctions and to perform repairs.
| CHECK DLC3 |
Check the DLC3 (Click here).
| CAMERA SYNCHRONOUS ERROR HISTORY |
Check camera synchronous error history.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Navigation System / Utility / Camera Synchronous Error History.
When an item is stored for Camera Synchronous Error History, record it before repairing the radio and display receiver assembly and television camera assembly.
Clear camera synchronous error history.
When DTCs are cleared using any of the following operations, Camera Synchronous Error History will be cleared as well.
(Click here)
| VIDEO DEVICE CONNECTION CHECK |