BATTERY SMART UNIT > INSTALLATION |
| 1. INSTALL BATTERY SMART UNIT |
![]() |
Install the battery smart unit with the bolt.
| *a | Black Label |
Connect the connector.
| 2. INSTALL NO. 2 HYBRID VEHICLE BATTERY SHIELD PANEL |
Install the No. 2 hybrid vehicle battery shield panel with the 2 bolts and nut.
Connect the 3 wire harness clamps.
Connect the 2 connectors.
![]() |
Install the battery cover lock striker, then push the button to lock it.
| *1 | Battery Cover Lock Striker |
| *2 | Button |
| *a | Push |
| 3. INSTALL REAR SEATBACK ASSEMBLY |
Lift the rear seat back LH.
![]() |
Engage the guide and claw to install the No. 2 room partition cover.
Connect the rear seat outer belt to the rear seat center shoulder belt guide.
Lift the rear seat back RH.
| 4. INSTALL SERVICE PLUG GRIP |