Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM

DTC    C1300    Skid Control ECU Malfunction

for Preparation Click here


DESCRIPTION

The skid control ECU stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
C1300
-
Skid control ECU internal malfunction.
Skid control ECU (Brake booster with master cylinder assembly)

INSPECTION PROCEDURE

1.REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY
  1. Replace the skid control ECU (brake booster with master cylinder assembly) (Click here for LHD or Click here for RHD).

  1. Perform initialization and calibration of the linear solenoid valve (Click here).

  1. Perform zero point calibration of the yaw rate and acceleration sensor (Click here).

  1. Perform the sensor check in the Test Mode procedure (Click here).


NEXT

END