FUEL INJECTOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCHARGE FUEL SYSTEM PRESSURE |
| 3. REMOVE LUGGAGE TRIM SERVICE HOLE COVER |
![]() |
Disengage the claw to remove the luggage trim service hole cover.
| 4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL |
| 5. DISCONNECT INTAKE MANIFOLD |
| 6. DISCONNECT FUEL TUBE SUB-ASSEMBLY |
![]() |
Remove the No. 1 fuel pipe clamp.
![]() |
Pinch the retainer of the fuel tube connector, and then pull the fuel tube connector off of the fuel pipe.
| *1 | Fuel Pipe |
| *2 | Fuel Tube Connector |
| *3 | Nylon Tube |
| *4 | O-ring |
| *5 | Retainer |
![]() | Pinch |
![]() | Pull |
Remove the fuel tube sub-assembly from the fuel hose clamp.
| 7. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY |
![]() |
Disconnect the 4 fuel injector connectors.
Remove the 2 bolts, and then remove the fuel delivery pipe together with the 4 fuel injectors.
![]() |
Remove the 2 fuel delivery spacers from the cylinder head.
Remove the 4 injector vibration insulators from the cylinder head.
| 8. REMOVE FUEL INJECTOR ASSEMBLY |
![]() |
Pull the 4 fuel injectors out of the fuel delivery pipe.
Remove the O-ring from each fuel injector.
For reinstallation, attach a tag or label to each injector shaft.