Home › Engine / Hybrid System › 2AR-FXE COOLING › RADIATOR

RADIATOR > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work (Click here).



2. DRAIN COOLANT (for Engine)

NOTICE:
Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.



  1. Remove the radiator cap sub-assembly.


    A259346E01


    Text in Illustration 
    *1
    Radiator Cap Sub-assembly
    *2
    Radiator Drain Cock Plug

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


5. REMOVE ENGINE UNDER COVER RH


6. REMOVE ENGINE UNDER COVER LH


7. REMOVE LUGGAGE TRIM SERVICE HOLE COVER


    A259067
  1. Disengage the claw to remove the luggage trim service hole cover.



8. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


9. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


10. REMOVE INLET AIR CLEANER ASSEMBLY


    A259747
  1. Remove the 2 bolts and inlet air cleaner assembly.



11. REMOVE NO. 5 INVERTER BRACKET


    A258737
  1. Remove the 2 bolts and No. 5 inverter bracket.



12. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    A259362
  1. Disconnect the radiator reserve tank hose.

  1. Remove the 2 bolts and radiator reserve tank assembly.



13. DISCONNECT NO. 1 RADIATOR HOSE


    A259363
  1. Disconnect the No. 1 radiator hose.



14. DISCONNECT NO. 2 RADIATOR HOSE


    A255304
  1. Disconnect the No. 2 radiator hose and clamp.



15. DISCONNECT NO. 1 INVERTER COOLING PIPE ASSEMBLY


    A260430
  1. Remove the 2 bolts and disconnect the No. 1 inverter cooling pipe assembly.



16. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    B281669E01
  1. Using a screwdriver, remove the hood lock nut cap.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B281668
  1. Disconnect the connector.



    B281670E01
  1. Remove the 2 bolts and hood lock bolt.
    Text in Illustration 
    *1
    Hood Lock Bolt



    B281673
  1. Disconnect the hood lock control cable assembly and remove the hood lock assembly.



17. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    B281661E01
  1. Using a screwdriver, remove the hood lock nut cap.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B281667
  1. Disconnect the connector.



    B281671E01
  1. Remove the 2 bolts and hood lock bolt.
    Text in Illustration 
    *1
    Hood Lock Bolt



    B281672
  1. Disconnect the hood lock control cable assembly and remove the hood lock assembly.



18. REMOVE UPPER RADIATOR SUPPORT


    A263146
  1. Disconnect the 2 connectors.



    A264073E01
  1. Disconnect the hood lock control cable clamp and remove the 5 bolts and upper radiator support.
    Text in Illustration 
    *a
    for RHD:
    *b
    for LHD:

  1. Remove the 2 radiator support cushions.



19. REMOVE RADIATOR ASSEMBLY


    A260429
  1. Disconnect the 2 clamps.



    A259365
  1. Disconnect the 2 clamps and connector.



    A260431
  1. Disconnect the clamp and No. 4 inverter cooling hose.



    A259366
  1. Remove the 4 bolts and separate the condenser assembly from the radiator assembly (for inverter coolant).



    A259367
  1. Remove the radiator assembly with the fan assembly.

    NOTICE:
    Do not apply any excessive force to the radiator assembly (for inverter coolant), cooler condenser assembly or pipe when removing the radiator assembly.

  1. Remove the 2 lower radiator supports.



    A259368
  1. Release the 3 claws and lift the fan assembly from the radiator.