DTC B1630/23 Rear Airbag Sensor RH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1630/23 |
|
|
| 1.CHECK SIDE NO. 2 AIRBAG SENSOR ASSEMBLY RH |
![]() |
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Interchange the side No. 2 airbag sensor assembly RH with LH and connect the connectors to them.
Connect the cable to the negative (-) auxiliary battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1630/23 is output. | A |
| DTC B1635/24 is output. | B |
| DTCs B1630/23 and B1635/24 are not output. | C |
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Return the side No. 2 airbag sensor assembly RH and LH to their original positions and connect the connectors.
| *1 | Side No. 2 Airbag Sensor Assembly LH |
| *2 | Side Airbag Sensor Assembly RH |
|
| ||||
|
| ||||
| A | ||
| ||