HEADLIGHT CLEANER ACTUATOR > REMOVAL |
| 1. REMOVE FRONT BUMPER ASSEMBLY |
| 2. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Extend the headlight washer nozzle sub-assembly.
Disengage the 2 claws and remove the headlight washer nozzle sub-assembly.
| 3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY |
![]() |
Slide the clip and disconnect the headlight cleaner hose.
![]() |
Remove the bolt.
Push the tab (A) and disengage the claw and remove the headlight washer actuator sub-assembly as shown in the illustration.
