ENGINE HOOD COURTESY SWITCH > REMOVAL |
| 1. REMOVE FRONT BUMPER ASSEMBLY |
| 2. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for LHD) |
![]() |
Using a screwdriver, remove the hood lock nut cap.
| *1 | Protective Tape |
![]() |
Disconnect the connector.
![]() |
Remove the 2 bolts and hood lock bolt.
| *1 | Hood Lock Bolt |
![]() |
Disconnect the hood lock control cable assembly and remove the hood lock assembly.
| 3. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for RHD) |
![]() |
Using a screwdriver, remove the hood lock nut cap.
| *1 | Protective Tape |
![]() |
Disconnect the connector.
![]() |
Remove the 2 bolts and hood lock bolt.
| *1 | Hood Lock Bolt |
![]() |
Disconnect the hood lock control cable assembly and remove the hood lock assembly.