DTC U0100 Lost Communication with ECM / PCM "A" |
DTC U0101 Lost Communication with TCM |
DTC U0142 Lost Communication with Body Control Module "B" |
DTC U0155 Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) |
| DTC No. | DTC Detection Condition | Trouble Area |
| U0100 | Lost Communication with ECM / PCM "A" | CAN communication system |
| U0101 | Lost Communication with TCM | |
| U0142 | Lost Communication with Body Control Module "B" | |
| U0155 | Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) |
| 1.CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs (CAN communication system DTC) are output | A |
| No DTCs are output | B |
|
| ||||
| A | ||
| ||