HYBRID CONTROL SYSTEM > Loud Rattle from Hybrid Vehicle Transmission |
| 1.READ VALUE USING INTELLIGENT TESTER (ISC LEARNING) |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Power train / Engine and ECT / Data List / ISC Learning.
Read the display on the intelligent tester.
| Tester Display | Result | Proceed to |
| ISC Learning | Incmpl | A |
| Compl | B |
Turn the power switch off.
|
| ||||
| A | |
| 2.INITIALIZATION (ISC LEARNING) |
Initialize the learned values and perform idle learning (Click here).
Confirm that the idle speed is within the standard range.
Turn the power switch off.
|
| ||||
| OK | ||
| ||