NAVIGATION SYSTEM (for Radio and Display Type) > Vehicle Position Mark Deviates Greatly |
| 1.CHECK CABIN |
Check the cabin for any object that might interrupt radio reception or additional devices which use radio waves on the instrument panel. If such an object exists, remove it and check if the vehicle position mark returns to the appropriate position.
|
| ||||
| OK | ||
| ||
| 2.CHECK SURROUNDINGS |
Check if the vehicle is in a location where GPS signal reception is poor. If the vehicle is in such a place, relocate the vehicle and check if the vehicle position mark returns to the appropriate position.

| *a | Example | *b | In a tunnel |
| *c | In a building | *d | Under an overpass |
| *e | On a forest or tree-lined path | *f | Between tall buildings |
| *g | Under a cliff or overhang | - | - |
|
| ||||
| OK | ||
| ||
| 3.CHECK SYSTEM SENSORS (OPERATION CHECK) |
![]() |
Enter the "System Sensors Check" screen.
Refer to Check System Sensors in Operation Check (Click here).
Check how many of the following codes appear in the "Reception number".
|
| ||||
| OK | |
| 4.CHECK VEHICLE SIGNAL (OPERATION CHECK) |
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).
![]() |
Check that the display changes between ON and OFF according to shift lever operation.
| Shift Lever Position | Display |
| Except R | OFF |
| R | ON |
|
| ||||
| OK | ||
| ||