Display Function
Symptom
| Suspected Area
| See page
|
Black screen (no image appears on the screen)
| Proceed to "Black Screen"
|
Click here
|
Proceed to "Check Software Error History" in Operation Check
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Display does not dim (does not change to night screen) with tail switch on
| Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Power does not turn off (screen remains on)
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen is distorted
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen flicker or color distortion
| Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Navigation function switches can be operated while vehicle being driven
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Navigation Function
Symptom
| Suspected Area
| See page
|
Date and time on navigation screen are different from actual date and time
| Proceed to "Vehicle Position Mark Deviates Greatly"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU
|
Click here
|
Vehicle position mark moves slow or fast
| Proceed to "Vehicle Position Mark Deviates Greatly"
|
Click here
|
Drive the vehicle for sensor learning (at a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more)
| -
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU
|
Click here
|
Vehicle position mark deviates from correct position and does not return to correct position
| Proceed to "Vehicle Position Mark Deviates Greatly"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU
|
Click here
|
Vehicle position mark is not updated
| Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU
|
Click here
|
Cursor or map rotates when vehicle is stopped
| Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
Click here
|
Navigation ECU
|
Click here
|
Vehicle position mark moves in the opposite direction to the vehicle
| Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
Click here
|
Navigation ECU
|
Click here
|
Voice guidance does not function
| Proceed to "Voice Guidance does not Function"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Map display is incomplete
| Proceed to "Map Display Incomplete"
|
Click here
|
Navigation ECU
|
Click here
|
Route cannot be calculated
| Proceed to "Route cannot be Calculated"
|
Click here
|
Navigation ECU
|
Click here
|
Traffic information is not displayed on navigation screen
| Proceed to "Radio Broadcast cannot be Received or Poor Reception"
|
Click here
|
Navigation system cannot record memory point registration or each item setting
| Navigation ECU
|
Click here
|
A message indicating to wait for a while because of low temperature is displayed
| Start the engine and increase cabin temperature (near navigation ECU)
| -
|
Navigation ECU
|
Click here
|
A message is displayed because map data cannot be read, and current position screen is not displayed
| If a message appears only when driving on rough roads, check if the message disappears when vehicle is stopped
| -
|
Navigation ECU
|
Click here
|
Map screen turns white or blue (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally)
| Change map scale to the smallest (a scale that shows a large area)
| -
|
Navigation ECU
|
Click here
|
Customize parameters cannot be changed (customize parameters can be changed by using the GTS)
| Navigation ECU
|
Click here
|
Reverse signal does not change in vehicle signal check mode
| Proceed to "Reverse Signal Circuit"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Parking brake switch signal does not change in vehicle signal check mode
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
General Audio Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
No sound can be heard from speakers
| Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Abnormal noise occurs
| Proceed to "Noise Occurs"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Sound quality is bad in all modes (volume is too low)
| Check that the ASL function is off
| -
|
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
ASL does not function
| Check that the ASL function is on
| -
|
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
AUX Function
Symptom
| Suspected Area
| See page
|
External device sound cannot be heard or sound quality is bad (stereo jack is used)
| Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"AUX/VTR" is not displayed on system check mode screen
| Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen is distorted or not displayed only when using a device connected to the No. 1 stereo jack adapter assembly
| Check if the appropriate image signal setting (NTSC/PAL) is selected
| -
|
Connect a known good device to the No. 1 stereo jack adapter assembly and check if the image is output
| -
|
Connect using a known good cable and check if an image is output
| -
|
Proceed to "Display Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Radio and display receiver assembly
|
Click here
|
USB Audio System Function
Symptom
| Suspected Area
| See page
|
USB audio system sound cannot be heard or sound quality is bad (USB connector is used)
| Proceed to "Data Signal Circuit between Stereo Jack Adapter and Extension Module"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
USB device or "iPod" is not recognized
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
Track information such as track, artist and album names is not displayed
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
USB device or "iPod" is recognized but cannot play or play in a sorted order
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
Album cover art cannot be displayed
| Check that Display Cover Art on the USB device or "iPod" settings screen is set to on
| -
|
Check if similar symptoms occur with another vehicle
| -
|
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version
| -
|
Navigation ECU
|
Click here
|
User set album cover art cannot be displayed
| Check that a JPEG file is used for the album cover art registered to the music data in the "iPod"
| -
|
Navigation ECU
|
Click here
|
"iPod" battery cannot be charged
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
Screen is distorted or not displayed only when using the video function of an "iPod"
| Check if the "iPod" is set to output images
| -
|
Check if the appropriate image signal setting (NTSC/PAL) is selected
| -
|
Check if video sound input is set to A/V mode
| -
|
Connect using a known good cable and check if an image is output
| -
|
Proceed to "Data Signal Circuit between Stereo Jack Adapter and Extension Module"
|
Click here
|
Proceed to "Display Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen is distorted or not displayed only when using the USB device connected to the No. 1 stereo jack adapter assembly
| Check if the appropriate image signal setting (NTSC/PAL) is selected
| -
|
Check if video sound input is set to A/V mode
| -
|
Connect a known good USB device to the No. 1 stereo jack adapter assembly and check if the image is output
| -
|
Connect using a known good cable and check if an image is output
| -
|
Proceed to "Data Signal Circuit between Stereo Jack Adapter and Extension Module"
|
Click here
|
Proceed to "Display Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (w/ Wireless Charger)
|
Click here
|
No. 1 stereo jack adapter assembly (w/o Wireless Charger)
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" Hands-free Function
Symptom
| Suspected Area
| See page
|
"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone)
| Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone cannot be registered
| Proceed to "Cellular Phone Registration Failure"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected
| Check that no other cellular phone is connected as a hands-free device
| -
|
Bring the cellular phone near the in-vehicle device and reconnect it
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
| Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
| -
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone connection is disconnected
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Message that prompts to check the cellular phone is displayed
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed
| Turn the cellular phone connection conformation display on the in-vehicle device off
| -
|
Phonebook data cannot be transferred to Navigation ECU
| Check that the phonebook data automatic transfer setting of the in-vehicle device is on
| -
|
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)
| -
|
Check that no applications on the cellular phone are running
| -
|
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation
| -
|
Transfer phonebook data manually
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Phonebook data is cleared
| Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Phonebook data cannot be edited
| Check that the phonebook data automatic transfer setting of the in-vehicle device is off
| -
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
All the transferred phonebook data is sorted to "Other"
| Check that no applications on the cellular phone are running
| -
|
Check that phonebook data in the cellular phone is not stored to the SIM card
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on the cellular phone
| -
|
Cellular phone cannot make outgoing/incoming calls
| Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again
| -
|
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth"
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller's voice is interrupted by noise or sound quality is poor
| Check the receiving voice volume (if it is too high, voice may sound distorted)
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller's voice cannot be heard
| Check that reception voice volume is not set to minimum
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Caller's voice (your voice) is interrupted by noise or sound quality is poor
| Check the transmitting voice volume (if it is too high, voice may sound distorted)
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller cannot hear your voice
| When talking on the cellular phone, check that the mute button is not pressed
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Radio Receiver and Extension Module"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
No notification when a new SMS/MMS/e-mail has been received*1
| Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Received SMS/MMS/e-mail cannot be read*1
| Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
SMS cannot be replied to*1
| Move the vehicle into a cellular phone service area, and check the operation of the radio and display receiver assembly and cellular phone
| -
|
Check that the cellular phone can send an SMS/MMS/e-mail
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" Audio Function
Symptom
| Suspected Area
| See page
|
Portable player cannot be registered
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player cannot be connected manually/automatically
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Sound of portable player cannot be heard from speakers, or sound is low
| Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player does not play even after "Bluetooth" audio mode is selected
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player does not play
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Track information such as track number, track name, elapsed play time and playlist is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Operation switches for portable player such as play, pause, repeat and random are not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Battery condition of portable player is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" signal condition is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player cannot pause, select file, fast forward, fast rewind, play at random
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Noise occurs or sound skips when portable player plays
| Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Registered device cannot be deleted
| Proceed to "Registered Device cannot be Deleted"
|
Click here
|
Navigation ECU
|
Click here
|
Radio and display receiver assembly
|
Click here
|