FUEL PUMP ECU > INSTALLATION |
| 1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY |
Connect the fuel pump control ECU assembly connector.
Install the fuel pump control ECU assembly with the 2 nuts.
| 2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH |
Install the 3 clips.
Engage the fastener and install the luggage compartment inner trim cover LH.
| 3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Engage the 2 pins to install the 2 No. 1 luggage compartment trim hooks.
| *1 | Pin |
| 4. INSTALL REAR FLOOR FINISH PLATE |
![]() |
Engage the 4 clips and install the rear floor finish plate.
Install the 5 clips.
| 5. INSTALL BAGGAGE HOLDER NET (w/ Partition Net) |
Install the baggage holder net.
| 6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT |
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |