AUTOMATIC TRANSAXLE SYSTEM > MONITOR DRIVE PATTERN |
| TEST MONITOR DRIVE PATTERN FOR ECT |
Preparation for driving
Warm up the engine sufficiently (engine coolant temperature is 60°C (140°F) or higher).
Drive the vehicle when the ambient temperature is -10°C (14°F) or higher. Some malfunctions are not detected when the ambient temperature is less than -10°C (14°F).
Drive pattern

Drive the vehicle through all of the gears.
Stop → 1st → 2nd → 3rd → 4th → 5th → 6th → 6th (lock-up ON).
Confirm engine braking using the S position. While driving with S6 range selected and 6th gear lock-up on, move the shift lever toward "-" and downshift from 6th to 5th, 5th to 4th, 4th to 3rd, 3rd to 2nd, 2nd to 1st.
Repeat the above drive pattern three times or more.