POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Front Door Windows) > FAIL-SAFE CHART |
| PULSE FAILURE |
If the pulse sensor malfunctions, the following power window operations are prohibited.
| Power Window Operation | Condition | ||
| Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
| Manual up (Switch on the door) | ▲ | X | - |
| Manual down (Switch on the door) | ● | X | - |
| Auto up (Switch on the door) | X | X | - |
| Auto down (Switch on the door) | X | X | - |
| Manual up (Remote switch operation) | X | X | - |
| Manual down (Remote switch operation) | X | X | - |
| Auto up (Remote switch operation) | X | X | - |
| Auto down (Remote switch operation) | X | X | - |
| DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION |
If the window position or learned value is abnormal, the following power window operations are prohibited.
| Power Window Operation | Condition | ||
| Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
| Manual up (Switch on the door) | ● | X | - |
| Manual down (Switch on the door) | ● | X | - |
| Auto up (Switch on the door) | X | X | - |
| Auto down (Switch on the door) | X | X | - |
| Manual up (Remote switch operation) | X | X | - |
| Manual down (Remote switch operation) | X | X | - |
| Auto up (Remote switch operation) | X | X | - |
| Auto down (Remote switch operation) | X | X | - |
| INITIALIZATION FAILURE |
During initialization, when the window position or initialization complete status cannot be properly read from the non-volatile memory, the following power window operations are prohibited.
| Power Window Operation | Condition | ||
| Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
| Manual up (Switch on the door) | ● | X | - |
| Manual down (Switch on the door) | ● | X | - |
| Auto up (Switch on the door) | X | X | - |
| Auto down (Switch on the door) | X | X | - |
| Manual up (Remote switch operation) | X | X | - |
| Manual down (Remote switch operation) | X | X | - |
| Auto up (Remote switch operation) | X | X | - |
| Auto down (Remote switch operation) | X | X | - |
| LIN COMMUNICATION FAILURE |
If the LIN communication system is malfunctioning (communication stop), the power window control system prohibits operation as follows. (Operation is only possible using the power window switch of each seat.)
| Power Window Operation | Condition |
| Always | |
| Manual up | ●* |
| Manual down | ● |
| Auto up | - |
| Auto down | - |
| Power Window Operation | Condition |
| Always | |
| Manual up | ●* |
| Manual down | ● |
| Auto up | ●* |
| Auto down | ● |
| PULSE FAILURE AND LIN COMMUNICATION FAILURE |
If the LIN communication system is malfunctioning (communication stop) and the pulse sensor is malfunctioning, the following power window operations are prohibited.
| Power Window Operation | Condition |
| Always | |
| Manual up | X |
| Manual down | X |
| Auto up | X |
| Auto down | X |
| DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION AND LIN COMMUNICATION FAILURE / INITIAL FAILURE AND LIN COMMUNICATION FAILURE |
If the LIN communication system is malfunctioning and the window position and learned value are abnormal, or the LIN communication system is malfunctioning and the window position or initialization complete status cannot be properly read from the non-volatile memory during initialization, the following power window operations are prohibited.
| Power Window Operation | Condition |
| Always | |
| Manual up | ●* |
| Manual down | ● |
| Auto up | - |
| Auto down | - |
| Power Window Operation | Condition |
| Always | |
| Manual up | ●* |
| Manual down | ● |
| Auto up | X |
| Auto down | X |