HIGH INTENSITY DISCHARGE HEADLIGHT BULB > INSTALLATION |
| 1. INSTALL DISCHARGE HEADLIGHT BULB |
Set the discharge headlight bulb to the headlight unit.
![]() |
Lock the set spring to install the discharge headlight bulb as shown in the illustration.
| 2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY |
![]() |
Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration to connect it.
| *a | Red Line |
Check that the red line on the output harness is not twisted and store the harness in the headlight assembly securely so that the output harness is not pinched.
![]() |
Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration until the lock marks are aligned to install it.
| *a | Lock Mark |
Connect the connector.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |