Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT (for TMMK Made)

BLOWER UNIT (for TMMK Made) > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY
  1. Engage the 4 claws.

  1. Install the blower assembly with cooler evaporator sub-assembly with the 6 screws.



2. INSTALL AIR CONDITIONING HARNESS ASSEMBLY


    E315348
  1. Engage the 5 clamps to install the air conditioning harness assembly.

  1. Connect the 5 connectors.



    E227196
  1. Install the heater packing as shown in the illustration.



3. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    E227194
  1. Engage the 2 claws and 2 guides to install the No. 6 heater to register duct assembly as shown in the illustration.



4. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    E227192
  1. Engage the guide and 2 claws to install the No. 1 air duct sub-assembly as shown in the illustration.



5. INSTALL AIR CONDITIONING UNIT ASSEMBLY
(Click here)