FUEL INJECTOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCHARGE FUEL SYSTEM PRESSURE |
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE INTAKE AIR SURGE TANK ASSEMBLY |
| 5. DISCONNECT FUEL TUBE SUB-ASSEMBLY |
![]() |
Remove the No. 2 fuel pipe clamp.
| *1 | No. 2 Fuel Pipe Clamp |
| *2 | Fuel Tube Connector |
| *3 | Nylon Tube |
| *4 | O-ring |
| *5 | Fuel Pipe |
![]() | Pinch |
![]() | Pull |
Pinch the tube connector and pull out the fuel pipe.
| 6. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY |
![]() |
Disconnect the 6 fuel injector connectors.
![]() |
Remove the 5 bolts and fuel delivery pipe sub-assembly together with the 6 fuel injectors.
![]() |
Remove the 6 injector vibration insulators from the intake manifold.
| 7. REMOVE FUEL INJECTOR ASSEMBLY |
![]() |
Pull the 6 fuel injector assemblies out of the fuel delivery pipe sub-assembly.
![]() |
Remove the O-ring from each fuel injector assembly.
| *1 | O-ring |
For reinstallation, attach a tag or label to each injector shaft.