Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for TMMK Made)

HEADLIGHT ASSEMBLY (for TMMK Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL HEADLIGHT ASSEMBLY
  1. Connect each connector.

  1. Engage each clamp.

  1. Install the headlight assembly with the 3 screws and bolt.



2. INSTALL FRONT BUMPER ASSEMBLY
(Click here)


3. ADJUST HEADLIGHT AIMING
(Click here)