DTC B1635/24 Rear Airbag Sensor LH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1635/24 |
|
|
| 1.CHECK SIDE NO. 2 AIRBAG SENSOR ASSEMBLY LH |
![]() |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the side No. 2 airbag sensor assembly LH with RH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the engine switch off.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1635/24 is output. | A |
| DTC B1630/23 is output. | B |
| DTCs B1630/23 and B1635/24 are not output. | C |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the side No. 2 airbag sensor assembly LH and RH to their original positions and connect the connectors.
| *1 | Side No. 2 Airbag Sensor Assembly RH |
| *2 | Side Airbag Sensor Assembly LH |
|
| ||||
|
| ||||
| A | ||
| ||