NAVIGATION RECEIVER (for TMC, TMMR Made) > INSTALLATION |
| 1. INSTALL NAVIGATION RECEIVER ASSEMBLY |
| 2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
Engage the 4 clips to install the air conditioning control assembly.
| 3. INSTALL NO. 1 RADIO BRACKET |
Install the No. 1 radio bracket with the 4 screws.
| 4. INSTALL NO. 2 RADIO BRACKET |
Install the No. 2 radio bracket with the 4 screws.
| 5. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY |
Connect each connector.
Engage the 6 clips to the vehicle body to temporarily install the navigation receiver assembly with air conditioning control assembly.
Install the navigation receiver assembly with air conditioning control assembly with the 4 bolts.
| 6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH |
for Blank Type:
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
for 3 Switch Hole Type:
Connect each connector.
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
| 7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
Connect the connector.
![]() |
Engage the 4 clips to install the No. 2 instrument panel register assembly.
| 8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.
| 9. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.
| 10. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |