Home › Engine / Hybrid System ยท 6AR-FSE › EMISSION CONTROL › CANISTER

CANISTER > REMOVAL

for Preparation Click here



1. REMOVE FUEL TANK ASSEMBLY
(Click here)


2. REMOVE CANISTER (CHARCOAL CANISTER ASSEMBLY)


    A255919
  1. Disengage the wire harness clamp.



    A339000E01
  1. Slide the clip and disconnect the purge line hose from the fuel tube.
    Text in Illustration 
    *a
    Purge Line Hose
    *b
    Air Line Hose

  1. Slide the clip and disconnect the air line hose from the canister (charcoal canister assembly).



    A255921
  1. Remove the 2 bolts, clip and canister (charcoal canister assembly) from the vehicle body.