Home › Engine / Hybrid System ยท 6AR-FSE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 COOLING FAN MOTOR
  1. Install the No. 2 cooling fan motor with the 3 screws.

    Torque:
    2.6 N*m{ 27 kgf*cm , 23 in.*lbf }

  1. Engage the 3 clamps.



2. INSTALL COOLING FAN MOTOR
  1. Install the cooling fan motor with the 3 screws.

    Torque:
    2.6 N*m{ 27 kgf*cm , 23 in.*lbf }



3. INSTALL NO. 2 FAN

NOTICE:
Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

  1. Install the No. 2 fan with the nut.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }



4. INSTALL FAN

NOTICE:
Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

  1. Install the fan with the nut.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }



5. INSTALL RADIATOR ASSEMBLY
(Click here)