DTC B14B8 Refrigerant Shortage |
| DTC No. | DTC Detection Condition | Trouble Area |
| B14B8 | When the following conditions is detected using the refrigerant shortage check in normal operation: The amount of refrigerant is insufficient. |
|
| 1.CHECK FOR AIR CONDITIONING SYSTEM LEAK |
Install a manifold gauge set.
Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.
Evacuate the air conditioning system and check that vacuum can be maintained in it.
|
| ||||
| OK | |
| 2.CHARGE SYSTEM WITH REFRIGERANT |
Add an appropriate amount of refrigerant (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 3.CHECK FOR DTC |
Check for DTCs when the following conditions are met (Click here).
| Item | Condition |
| A/C Switch | On |
| A/C operation time | 15 minutes or more |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Engine coolant temperature | 45°C (113°F) or more |
| Engine condition | Engine running |
| Result | Proceed to |
| DTC B14B8 is output | A |
| DTC B14B8 is not output | B |
|
| ||||
| A | |
| 4.REPLACE COOLER EXPANSION VALVE |
Replace the cooler expansion valve with a new or known good one (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 5.CHARGE SYSTEM WITH REFRIGERANT |
Add an appropriate amount of refrigerant (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 6.CHECK FOR DTC |
Check for DTCs when the following conditions are met (Click here).
| Item | Condition |
| A/C Switch | On |
| A/C operation time | 15 minutes or more |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Engine coolant temperature | 45°C (113°F) or more |
| Engine condition | Engine running |
| Result | Proceed to |
| DTC B14B8 is output (for TMC, TMMR Made) | A |
| DTC B14B8 is output (for TMMK Made) | B |
| DTC B14B8 is not output | C |
|
| ||||
|
| ||||
| A | ||
| ||
| 7.REPAIR AIR CONDITIONING SYSTEM LEAK |
Identify the area where refrigerant leaks (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
Repair the identified area of the air conditioning system.
Evacuate the air conditioning system.
| NEXT | |
| 8.CHARGE SYSTEM WITH REFRIGERANT |
Add an appropriate amount of refrigerant (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 9.CHECK FOR DTC |
Check for DTCs when the following conditions are met (Click here).
| Item | Condition |
| A/C Switch | On |
| A/C operation time | 15 minutes or more |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Engine coolant temperature | 45°C (113°F) or more |
| Engine condition | Engine running |
| Result | Proceed to |
| DTC B14B8 is output | A |
| DTC B14B8 is not output | B |
|
| ||||
| A | |
| 10.REPLACE COOLER EXPANSION VALVE |
Replace the cooler expansion valve with a new or known good one (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 11.CHARGE SYSTEM WITH REFRIGERANT |
Add an appropriate amount of refrigerant (Click here(for TMC, TMMR Made)) (Click here (for TMMK Made)).
| NEXT | |
| 12.CHECK FOR DTC |
Check for DTCs when the following conditions are met (Click here).
| Item | Condition |
| A/C Switch | On |
| A/C operation time | 15 minutes or more |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Engine coolant temperature | 45°C (113°F) or more |
| Engine condition | Engine running |
| Result | Proceed to |
| DTC B14B8 is output (for TMC, TMMR Made) | A |
| DTC B14B8 is output (for TMMK Made) | B |
| DTC B14B8 is not output | C |
|
| ||||
|
| ||||
| A | ||
| ||