DTC B2313 Glass Position Initialization Incomplete |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2313 |
|
|
| DTC No. | DTC Detection Condition | Trouble Area |
| B2313 |
|
|
| 1.PERFORM INITIALIZATION (APPLICABLE LOCATION) |
Turn the engine switch on (IG).
Initialize the power window regulator motor assembly (Click here).
| NEXT | |
| 2.CHECK DTC OUTPUT |
Turn the engine switch off.
Wait for at least 10 seconds, and then turn the engine switch on (IG).
Check for DTCs (Click here).
| Result | Proceed to |
| OK | A |
| NG (Driver door power window) | B |
| NG (Front passenger door power window) |
|
| ||||
| A | ||
| ||