Factor
| Condition
|
Weather/Climate
| When driving in bad weather (rain, snow, fog, sandstorms, etc.).
|
Front windshield
| - When the front windshield is not clear (ice, snow or frost on the glass).
- When the front windshield is dirty (sand, mud, water stains or bugs on the glass).
- When the front windshield is cracked.
- When the front windshield is fogged-up.
- When the front windshield has a film attached.
- When an object on the instrument panel reflects off of the front windshield.
- When any other abnormal conditions exist with the front windshield.
|
Inner rear view mirror assembly
| - When a parking tag, magnifying lens or other accessory is mounted on the inner rear view mirror assembly.
- When the inner rear view mirror assembly or its built-in camera is deformed.
- When the camera sensor in the inner rear view mirror assembly is dirty.
- When any other abnormal conditions exist with the inner rear view mirror assembly or its built-in camera sensor.
|
Nearby vehicles or lights
| - When lights similar to headlights or taillights are in the vicinity of the vehicle.
- When a nearby vehicle has no lights or its lights are off.
- When a vehicle in front has misaligned lights, or its lights are changing color.
- When a vehicle in front has extremely dirty headlights or taillights.
|
Road conditions
| - When driving in areas where the conditions often change between bright and dark.
- When driving on hilly roads.
- When driving on winding roads or around sharp curves.
- When driving on bumpy roads (cobblestone paving, gravel roads, rough unpaved roads, etc.).
- When highly reflective objects are in front of the vehicle (mirrors, road signs, etc.).
|
Own vehicle
| - When the headlights are damaged, deformed or dirty.
- When the vehicle posture is abnormal (posture has changed due to the vehicle being fully loaded, a trailer being towed, road conditions, etc.).
- When the vehicle has other malfunctions or it has been modified.
|
Automatic high beam system
| Malfunction: - When the indicator light on the combination meter assembly is off and "Check Headlight System" is displayed on the multi-information display.
Others: - When the automatic high beam system does not seem to be turning the high beams on and off properly.
- When the automatic high beam system is frequently turning the high beams on and off.
- When the glare from the high beams would disturb pedestrians or the drivers of other vehicles.
|