Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION WIRE
  1. Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

  1. Coat the temperature sensor with ATF.

  1. Connect the temperature sensor and install the lock plate with the bolt to the transmission valve body assembly.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

  1. Engage the clamp and connect the transmission wire.

  1. Connect the 7 connectors of the shift solenoid valve.

  1. Connect the connector of the transmission revolution sensor.



2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(Click here)