Home › Drivetrain ยท U761E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > REMOVAL

for Preparation Click here



1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
(Click here)


2. REMOVE TRANSMISSION WIRE


    C317170
  1. Disconnect the transmission revolution sensor connector.



    C317172
  1. Disconnect the 7 shift solenoid valve connectors.

  1. Disengage the clamp.



    C317171
  1. Remove the bolt and lock plate and disconnect the temperature sensor from the transmission valve body assembly.



    C201698
  1. Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.