Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(Click here).


2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    A255017E01
  1. Using SST, remove the heated oxygen sensor from the front exhaust pipe sub-assembly.

    SST
    09224-00011  



3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    A255019E01
  1. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

    SST
    09224-00011