DTC B279C Theft Deterrent System Presence Detection |
| DTC No. | DTC Detection Condition | Trouble Area | DTC Output Confirmation Operation |
| B279C | An ECM that is incompatible with engine immobiliser system is installed. | ECM | Check for DTCs. |
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
| Engine cannot be started | - |
| DTC No. | Data List and Active Test |
| B279C | - |
| 1.REPLACE ECM |
Temporarily replace the ECM with a new one (Click here).
| NEXT | |
| 2.REGISTER ECU COMMUNICATION ID |
Register the ECU communication ID.
| NEXT | |
| 3.CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 4.CHECK FOR DTC |
Perform "DTC Output Confirmation Operation" procedure.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B279C is not output | A |
| DTC B279C is output | B |
|
| ||||
| A | ||
| ||