FRONT BRAKE FLEXIBLE HOSE > INSTALLATION |
| 1. INSTALL FRONT FLEXIBLE HOSE |
![]() |
Install a new clip to the front flexible hose.
| *1 | Clip |
| *a | Torque Wrench Fulcrum Length |
Using a union nut wrench, connect the brake line to the front flexible hose while holding the flexible hose with a wrench.
![]() |
Install the front speed sensor clamp and front flexible hose to the shock absorber bracket with the bolt.
| *1 | Front Speed Sensor Clamp |
| *2 | Front Flexible Hose |
| *3 | Claw |
![]() |
Connect the front flexible hose to the front disc brake cylinder assembly with a new union bolt and a new gasket.
| *a | Lock Hole |
| 2. BLEED BRAKE LINE |
| 3. INSTALL FRONT WHEEL |