DTC B15F7 Certification ECU Vehicle Information Reading/Writing Process Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B15F7 | Certification ECU (smart key ECU assembly) vehicle setting processing malfunction |
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
Use the GTS to check if the CAN communication system is functioning normally (Click here).
|
| ||||
| OK | |
| 2.CHECK SMART ENTRY AND START SYSTEM |
for Entry Function:
Check if the smart entry and start system is malfunctioning (Click here).
for Start Function:
Check if the smart entry and start system is malfunctioning (Click here).
| Result | Proceed to |
| OK | A |
| NG (for Entry Function) | B |
| NG (for Start Function) | C |
|
| ||||
|
| ||||
| A | |
| 3.CHECK CUSTOMIZE ITEMS |
Make a note of the customizable items for the certification ECU (smart key ECU assembly) related system.
To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the smart entry and start system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen (Click here).
To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the smart entry and start system (for Start Function) related items that can be customized via the navigation system vehicle customization screen (Click here).
Using the GTS, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.
| Result | Proceed to |
| NG | A |
| OK (for TMMK Made) | B |
| OK (for TMC Made) | C |
|
| ||||
|
| ||||
| A | ||
| ||