DTC U0100 Lost Communication with ECM / PCM "A" |
DTC U0126 Lost Communication with Steering Angle Sensor Module |
DTC U0129 Lost Communication with Brake System Control Module |
DTC U0131 Lost Communication with Power Steering Control Module |
DTC U0140 Lost Communication with Body Control Module |
DTC U0163 Lost Communication with Navigation Control Module |
DTC U1110 Lost Communication with Intuitive Parking Assist Module |
| DTC No. | DTC Detection Condition | Trouble Area |
| U0100 | Lost communication with ECM | CAN communication system |
| U0126 | Lost communication with steering sensor | |
| U0129 | Lost communication with brake actuator assembly (skid control ECU) | |
| U0131 | Lost communication with power steering ECU assembly | |
| U0140 | Lost communication with main body ECU (multiplex network body ECU) | |
| U0163 | Lost communication with radio and display receiver assembly | |
| U1110 | Lost communication with clearance warning ECU assembly |
| 1.CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output (Click here).
| Result | Proceed to |
| DTCs are output | A |
| No DTCs are output | B |
|
| ||||
| A | ||
| ||