Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY

FRONT TURN SIGNAL LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY


    E300979
  1. Remove the 2 screws and front turn signal light assembly.



3. REMOVE FRONT TURN SIGNAL LIGHT BULB
  1. Disconnect the connector.



    E300980
  1. Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to remove them as a unit.

  1. Remove the front turn signal light bulb from the front turn signal light socket.