REAR SEAT SIDE AIRBAG ASSEMBLY (for TMMK Made) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.
| a | 100 mm (3.94 in.) or less |
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.
| 4. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.
| 5. REMOVE REAR SIDE SEATBACK ASSEMBLY |
Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide.
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the rear side seatback assembly LH.
| 6. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 7. REMOVE REAR SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the 8 hooks.
![]() |
Disengage the clamp and remove the 2 nuts.
![]() |
Remove the rear side seatback frame sub-assembly and rear seat airbag assembly from the rear side seatback cover with pad.
| *1 | Rear Side Seatback Frame Sub-assembly |
| *2 | Rear Seat Airbag Assembly |
| *3 | Rear Side Seatback Cover with Pad |