CHILD RESTRAINT SEAT ANCHOR BRACKET (for TMC, TMMR Made) > INSTALLATION |
| 1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH |
Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.
| 2. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH |
Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.
| 3. INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type) |
Place the rear seatback assembly LH in the cabin.
Install the rear seatback assembly LH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the 2 rear seat belts to the 2 rear seat shoulder belt guides.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly LH.
| 4. INSTALL REAR SEATBACK COVER (for Reclining Seat Type) |
Engage the 4 claws to install the 2 rear seatback covers.
| 5. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type) |
| 6. INSTALL REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type) |
Place the rear seatback assembly RH in the cabin.
Install the rear seatback assembly RH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the rear seat belt to the rear seat shoulder belt guide.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly RH.
| 7. INSTALL REAR SEATBACK COVER (for Reclining Seat Type) |
Engage the 4 claws to install the 2 rear seatback covers.
| 8. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type) |
| 9. INSTALL REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type) |
![]() |
Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.
| 10. INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) |
Place the rear seat cushion assembly in the cabin.
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly.
Connect the 2 seat heater connectors.
![]() |
Engage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly to the 2 rear seat cushion lock hooks as shown in the illustration.
Confirm that the rear seat cushion assembly is securely installed.
| 11. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type) |
![]() |
Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.
| 12. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) |
Place the rear seat cushion assembly in the cabin.
w/ Seat Heater System:
Engage the 2 clamps.
Connect the connector.
![]() |
Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.
Confirm that the rear seat cushion assembly is firmly installed.
| 13. INSTALL REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type) |
Place the rear seatback assembly LH in the cabin.
w/ Seat Heater System:
Engage the clamp.
Connect the connector.
Install the rear seatback assembly LH with the 2 bolts.
![]() |
Engage the fastener as shown in the illustration.
Raise the rear seatback assembly LH.
Connect the rear seat outer belt assembly to the rear seat center shoulder belt guide.
| 14. INSTALL REAR SEAT HEADREST ASSEMBLY (for Fold Down Seat Type) |
| 15. INSTALL REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type) |
Place the rear seatback assembly RH in the cabin.
w/ Seat Heater System:
Engage the clamp.
Connect the connector.
Install the rear seatback assembly RH with the 2 bolts.
![]() |
Engage the fastener as shown in the illustration.
Raise the rear seatback assembly RH.
| 16. INSTALL REAR SEAT HEADREST ASSEMBLY (for Fold Down Seat Type) |
| 17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 18. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag) |