CHILD RESTRAINT SEAT ANCHOR BRACKET (for TMMK Made) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.
| a | 100 mm (3.94 in.) or less |
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.
| 4. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.
| 5. REMOVE INNER LUGGAGE COMPARTMENT TRIM PAD |
![]() |
Remove the inner luggage compartment trim pad.
| 6. REMOVE REAR SEATBACK ASSEMBLY LH |
![]() |
Disengage the 2 fasteners as shown in the illustration.
| *a | Fastener |
![]() |
Remove the 2 bolts and rear seatback assembly LH.
| 7. REMOVE REAR SEATBACK ASSEMBLY RH |
![]() |
Disengage the 3 fasteners as shown in the illustration.
| *a | Fastener |
![]() |
Remove the 2 bolts and rear seatback assembly RH.
| 8. REMOVE REAR SIDE SEATBACK ASSEMBLY LH |
Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide.
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the rear side seatback assembly LH.
| 9. REMOVE REAR SIDE SEATBACK ASSEMBLY RH |
Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide.
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the rear side seatback assembly RH.
| 10. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH |
![]() |
Remove the 2 nuts and child restraint seat anchor bracket sub-assembly LH.
| 11. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH |
![]() |
Remove the 2 nuts and child restraint seat anchor bracket sub-assembly RH.