REAR SEATBACK HEATER (for Reclining Seat Type) > REMOVAL |
| 1. PRECAUTION (w/ Rear Seat Side Airbag) |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 3. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.
| a | 100 mm (3.94 in.) or less |
Disconnect the 2 seat heater connectors.
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.
| 5. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.
| 6. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the 2 rear seatback covers.
| 7. REMOVE REAR SEATBACK ASSEMBLY |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.
Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly LH.
| 8. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat center shoulder belt guide.
| 9. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 10. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD |
![]() |
Disengage each hooks.
Remove the 12 hog rings.
w/ Rear Seat Side Airbag:
![]() |
Remove the nut and separate the airbag bracket.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
Disengage the clamp to disconnect the seat heater wire harness from the rear seatback frame sub-assembly LH.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
| 11. REMOVE SEPARATE TYPE REAR SEATBACK COVER (REAR SEATBACK HEATER SUB-ASSEMBLY) |
![]() |
Remove the 10 hog rings and separate type rear seatback cover (rear seatback heater sub-assembly) from the separate type rear seatback pad.