DTC C1691 Back Camera Initialization Incomplete |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1691 | Back camera initial setting has not been memorized (rear television camera assembly optical axis adjustment (back camera position setting) is incomplete) |
|
| 1.PERFORM CALIBRATION |
Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.
Rear television camera assembly optical axis adjustment (back camera position setting) (Click here).
| NEXT | |
| 2.CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output (Click here).
| Result | Proceed to |
| DTC C1691 is output | A |
| DTC C1691 is not output | B |
|
| ||||
| A | ||
| ||