Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

DTC    B15C8    Digital TV Antenna 1 Disconnected

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the television antenna assembly which is connected to the navigation receiver assembly.

DTC No.
DTC Detection Condition
Trouble Area
B15C8
Television antenna assembly is not connected
  1. Antenna cord sub-assembly
  2. No. 2 antenna cord sub-assembly
  3. No. 3 antenna cord sub-assembly
  4. Television antenna assembly
  5. Navigation receiver assembly

INSPECTION PROCEDURE

1.REPLACE ANTENNA CORD SUB-ASSEMBLY
  1. Replace the antenna cord sub-assembly with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.



NG
Go to step 2
OK

END 

2.REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY
  1. Replace the No. 2 antenna cord sub-assembly with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.



NG
Go to step 3
OK

END 

3.REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY
  1. Replace the No. 3 antenna cord sub-assembly with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.



NG
Go to step 4
OK

END 

4.REPLACE TELEVISION ANTENNA ASSEMBLY
  1. Replace the television antenna assembly with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.

    Result:
    Result
    Proceed to
    OK
    A
    NG (for TMMK Made)
    B
    NG (for TMC Made)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (for TMMK Made) (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (for TMC Made) (Click here)
A

END