Home
›
Engine / Hybrid System ยท 6AR-FSE
›
ENGINE CONTROL
›
SFI SYSTEM
SFI SYSTEM > PRECAUTION
for Preparation
Click here
1.INITIALIZATION
NOTICE:
Perform Registration (VIN registration or frame number registration) when replacing the ECM (
Click here
).
Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).
Make sure to perform Reset Memory (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM (
Click here
).
When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
System Name
See Procedure
Parking Assist Monitor System
Click here
2.WHEN USING GTS
CAUTION:
Observe the following items for safety reasons:
Before using the GTS, read the instruction manual.
Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.