Home › Engine / Hybrid System ยท 6AR-FSE › FUEL › FUEL PUMP ECU

FUEL PUMP ECU > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY
  1. Connect the fuel pump control ECU assembly connector.

  1. Install the fuel pump control ECU assembly with the 2 nuts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
  1. Install the 3 clips.

  1. Engage the fastener and install the luggage compartment inner trim cover LH.



3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B281710E01
  1. Engage the 2 pins to install the 2 No. 1 luggage compartment trim hooks.
    Text in Illustration 
    *1
    Pin



4. INSTALL REAR FLOOR FINISH PLATE


    B294807
  1. Engage the 4 clips and install the rear floor finish plate.

  1. Install the 5 clips.



5. INSTALL BAGGAGE HOLDER NET (w/ Partition Net)
  1. Install the baggage holder net.



6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
  1. Install the luggage compartment floor mat.



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).