Home › Engine / Hybrid System › 2AR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065323 2AR-FE ENGINE CONTROL _0319006 CAMSHAFT OIL CONTROL VALVE A

2AR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11101J 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

a.
A405000

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A195062C35
1.021,0.448 1.313,0.448 1.313,0.448 1.594,0.875 false 0.844,0.385 1.156,0.542 0.313,0.156 10 *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 11101J 3.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

a.
A405001

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A195062C36
1.021,0.448 1.313,0.448 1.313,0.448 1.594,0.875 false 0.844,0.385 1.156,0.542 0.313,0.156 10 *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.